Showing posts with label animatronic wild pig. Show all posts
Showing posts with label animatronic wild pig. Show all posts

Friday, February 18, 2011

Animatronic Wild Pig stand
There are six screws in the clamping plate.  Those can be loosened enough to either hold the pig in place or allow it to removed from the stand.  If a person is sitting on the pig, this clamp should be tightened.  

Dual Whammer Jammer cable controller B
This controller is labeled 1B, 2B, 3B, 4B for the matching moves.
One of the moves is for the nose lift.  Center the controllers before tightening down the cable clamps.  Have a friend help, if needed.  It is a three handed job.  Mount the bottom of this controller to one of the boards provided, or to the stage floor.  Cabling comes up from the bottom of this controller (see bottom arrow).  The top arrow shows where the cables come up and the ferrules are threaded down.  Then the bare cable wraps around the spindle and is threaded through the cable clamps.  Then the cable clamps are tightened while the controller is centered.